Hello Guest it is December 15, 2019, 03:21:20 AM

Author Topic: E-STOP - Help  (Read 2510 times)

0 Members and 1 Guest are viewing this topic.

E-STOP - Help
« on: August 02, 2013, 10:30:30 AM »
Can anyone tell me why when I configure an external E-Stop for my machine I get 4 " Port 1 Pins Current State " leds to light up?  When I toggle the E-Stop switch the number 4 led goes on and off but the first 3 leds always remain on. I have no other inputs to mach 3 at this time.
Thanks.

Online Tweakie.CNC

*
  • *
  •  8,023 8,023
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: E-STOP - Help
« Reply #1 on: August 02, 2013, 12:09:24 PM »
Don't pay too much attention to the "Port 1 Pins Current State" LED's - they seldom work correctly, if at all.

The "Input Signals Current State" and "Output Signals Current State" are what you should be guided by.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: E-STOP - Help
« Reply #2 on: August 02, 2013, 12:29:58 PM »
Thank You.