scgrove,
This is the 4 TH thread ( others were on 6/10,20, and 23 ) you have created asking for help.
Same / similar initial beginning post.
Folks have replied to you in the other posts.
If you keep to the same thread at least someone will have a perspective of what you need and can be additive to posted
replies. You can for example just reply and ask ..... " anybody else out there willing to help".
That said, be patient, since any and all replies are given voluntarily should they so desire to assist.
BTW, seems Jerry responded to you in the other thread
http://www.machsupport.com/forum/index.php/topic,24884.msg176301.html#msg176301ASAP for you is not necesssarily so for others and you should understand that.
In the mean time I would strongly suggest you start reading the Mach mill manuals, learn about the machine you purchased and learn something about CNC. Of what value would it be if I came over to your place, installed whatever you need , set everything up, and said there you go ..........enjoy!
You would still have no clue as to what is required to make a piece on your machine.
Sorry but CNC is just not plug and play,
RICH