Hello Guest it is November 15, 2019, 02:13:39 AM

Author Topic: Help Define  (Read 2249 times)

0 Members and 1 Guest are viewing this topic.

Help Define
« on: February 23, 2007, 07:46:46 PM »
Hello:

Newbie here... can someone help me with signal definitions - else point me to a place in some documentation...?

X Home
X ++
X --
EStop
Limit Ovrd

I used the .XLM config file on this site for the MAXNC CL, but I found out too late that the config didn't assign the stop/limit switches - so I broke something...  >:(

I suppose I need to assign the X, Y, and Z limnit switches to something... but what signal to they belong?

Thanks for the help.
-charlie

Offline Chip

*
  • *
  •  2,056 2,056
  • Gainesville Florida USA
    • View Profile
Re: Help Define
« Reply #1 on: February 23, 2007, 09:31:39 PM »
Hi, Charlie

There is a Mach3 manual that explains all of this, above, Tutorials, Documentations.

This will take you there, http://www.machsupport.com/documentation/M3M1_84-A2.pdf

Hope this Helps, Chip
Re: Help Define
« Reply #2 on: February 24, 2007, 01:25:25 PM »
Thanks for the help Chris, printing it now.
-charlie