Hello Guest it is March 28, 2024, 06:13:52 AM

Author Topic: cycle stop in middle of axis move  (Read 8533 times)

0 Members and 1 Guest are viewing this topic.

Re: cycle stop in middle of axis move
« Reply #10 on: May 06, 2013, 01:34:56 PM »
mach version is .066

Offline Jeff_Birt

*
  •  1,107 1,107
    • View Profile
    • Soigeneris
Re: cycle stop in middle of axis move
« Reply #11 on: May 06, 2013, 03:00:57 PM »
Please use mach3 version .062 instead. There have been a LOT of problems reported to .066 so I do not recommend it. You can get it from the Mach FTP site (see resources link at top of every page) or from my website here: http://www.soigeneris.com/documentation-content.aspx .
Happy machining , Jeff Birt