Hello Guest it is March 28, 2024, 10:11:08 PM

Author Topic: Y axis moving in the wrong direction  (Read 4845 times)

0 Members and 1 Guest are viewing this topic.

Y axis moving in the wrong direction
« on: April 25, 2013, 10:31:35 PM »
I am using VcarvePro, Mach3 with CRP4896 profile and Gercko G540.

I set sll azis to 0 in the lower left corner then enter G0X1Y1 on the MDI screen.  X moves in the correct diretion.  Y slams the bumper.  I have the same problem with g-code - the Y moves in the wrong direction.

I have searched the Mach3 help and cannot find any way to reverse the default direction of the Y axis.  Is there a way to handle this in Mach3?
Re: Y axis moving in the wrong direction
« Reply #1 on: April 26, 2013, 12:48:56 AM »
Go to ports & pins.  Click on motor outputs tab. Check or uncheck the DirLowActive to whatever it isn't now for that particular axis.
Re: Y axis moving in the wrong direction
« Reply #2 on: April 26, 2013, 01:44:49 AM »
Thanks very much.