Hello Guest it is July 20, 2019, 08:07:02 AM

Author Topic: A little more help needed  (Read 2519 times)

0 Members and 1 Guest are viewing this topic.

A little more help needed
« on: February 09, 2007, 04:40:57 PM »
currently my machine is cutting right along the line i have drawn other the changing my drawing how do i make the tool cut to the outside of the line so everything i needed inside the line is still there. i am sorry if this is a stupid question but i am very new at this

Thank You

Hood

*
Re: A little more help needed
« Reply #1 on: February 09, 2007, 05:49:36 PM »
Not too great at G Code myself but you should be able to  use G41 or G42 to offset by the radius of your cutter.
Hood

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: A little more help needed
« Reply #2 on: February 09, 2007, 09:05:40 PM »
As mentioned, you can use G41/G42, but you'll need lead-in moves and possibly lead-out moves. Usually not for beginners.

 If you're using AutoCAD, use the offset command and offset the lines by 1/2 the tool diameter. Delete the original lines and use the offset ones to create the g-code.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: A little more help needed
« Reply #3 on: February 11, 2007, 09:23:09 AM »
Gerry is right! offsetting in DXF is a much better way to go... Cutter comp is not as simple as it sounds
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com