Hello Guest it is March 29, 2024, 08:29:33 AM

Author Topic: Converting a Probotix Fireball Comet to MACH3  (Read 2894 times)

0 Members and 1 Guest are viewing this topic.

Converting a Probotix Fireball Comet to MACH3
« on: April 12, 2013, 09:57:43 PM »
Hello,

Has anyone converted a Probotix Fireball Comet to MACH3 from EMC2?

I was told that MACH3 couldn't run this little table due to the dual Y axis steppers.  I had a Plasmaroute table with a dual Y axis stepper and MACH3 didn't have any issue with it.  What I am hoping for is that someone has a configuration file I could try.

https://www.probotix.com/FireBall_Comet_cnc_router/

Thank you,

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Converting a Probotix Fireball Comet to MACH3
« Reply #1 on: April 13, 2013, 07:21:56 AM »
Who told you that? There are thousands of machine running dual driven axis using Mach3's slaving function. It's very easy to set up.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html