Hello Guest it is November 14, 2019, 09:07:21 PM

Author Topic: Machine Coordinates vs. Work coordinates  (Read 1901 times)

0 Members and 1 Guest are viewing this topic.

Machine Coordinates vs. Work coordinates
« on: April 09, 2013, 05:55:36 PM »
I suspect this is an easy one for the forum but I've been combing the internet for days looking for an answer.

I am using Mach3 with the Blue screenset on my 3 axis router table and am having trouble with the zero'ing VB code. Especially on the Z-Axis when I touch off my plate it zero's the Machine coordinates. This puts my machine close to the softlimits and limits my travel. I would rather it zero the Work coordinates as my machine has already been zero'd so the limits are correct. Any ideas? Forgive me for not posting examples of the VB code I am away from my machine at the moment.

Thanks!!
Re: Machine Coordinates vs. Work coordinates
« Reply #1 on: April 09, 2013, 09:55:37 PM »
Ok, Nevermind, I must have been looking at something wrong. It seems to be working fine now. I should stop staying up so late fiddling with the machine.  ;D