No this is an I3 With Windows XP 32bit on it. I just look on Sherline web site, more than likely this is going to cost me more than if I had gotten it with the package in the first place. This is what they have for the computer and trust me this is old school.
Processor: AMD Athlon XP 1900+ (1.2 Ghz or faster)
Motherboard: Via KT133 OEM reference board, Ethernet and sound in northbridge
RAM: 256 Mb
Hard Drive: 40 Gb
Internal drives: CD-RW and 3.5” Floppy
Current: Internal switches are set to 110VAC but can be reset for operation with 230 VAC
Installed software: Ubuntu Linux based, with real time extensions, EMC2 4-axis CNC software.
Included peripherals: Keyboard, mouse and connection cables for stepper motors (Monitor to be supplied by customer)
Stepper motor drivers/Power supply: 4 drivers installed inside computer box run off separate power supply also installed inside computer box. Power supply output: 6.5 amp, 24-28 VDC
Other features: Separate on/off switch for drivers so computer can remain powered up without power to stepper motors
Also included: backup CD-ROM with Linux and EMC, plus a second CD with the instruction manual as a PDF and/or HTML document.
I don't think I have anymore IDE Hard Drives anymore, and not sure if I have any of the old ram (256 RAM LOL ). Poor Poor me LOL.