Hello Guest it is June 20, 2019, 01:44:26 PM

Author Topic: fastest way to drill.  (Read 3959 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,873 6,873
    • View Profile
Re: fastest way to drill.
« Reply #10 on: March 22, 2013, 02:55:32 PM »
Just create all your points then let the CAM do the rest. Modify your post to use a G0 feed and return instead of the Drill cycle.

(;-)TP
Re: fastest way to drill.
« Reply #11 on: March 22, 2013, 04:34:58 PM »
I Agree with TP,   ;D

but you have to use CV ( G64) mode AND all movement must be in G1 mode to get the shortest cycle time.

Here again 12 seconds ( 200 positions )

attachet the test code

Btw. nice looking part.

 :)