Hello Guest it is March 28, 2024, 08:12:48 AM

Author Topic: Waterjet/lookahead/accelerate-slowdown  (Read 5155 times)

0 Members and 1 Guest are viewing this topic.

Waterjet/lookahead/accelerate-slowdown
« on: February 05, 2007, 03:28:35 PM »
How and where do I apply settings to make the feedrate slow down before a curve and speed back up after it? Can I adjust these settings?
Peter 

Offline chad

*
  • *
  •  361 361
  • When the going gets weird, the weird turn pro.
    • View Profile
Re: Waterjet/lookahead/accelerate-slowdown
« Reply #1 on: February 09, 2007, 01:18:37 PM »
Hi,

In mach click on the settings tab. Look for "CV Fedrate" this is the speed mach will use if the angular limit is reached. You can set at what angle the alternate speed kicks in...


Chad

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Waterjet/lookahead/accelerate-slowdown
« Reply #2 on: February 09, 2007, 03:06:42 PM »
If by curve you mean G2/G3, then just change the feedrate on those lines of code.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Waterjet/lookahead/accelerate-slowdown
« Reply #3 on: February 09, 2007, 03:38:56 PM »
Thanks Ger21 and Chad. I cant do gcode so I dont know what youre talking about.(Spolit by Sheetcam)
Chad? where is the "second" speed you are referring to.
I worked on waterjet machines and I could specify the rate it slows down and speeds up in mm/min or whatever.
tnx again

Offline chad

*
  • *
  •  361 361
  • When the going gets weird, the weird turn pro.
    • View Profile
Re: Waterjet/lookahead/accelerate-slowdown
« Reply #4 on: February 09, 2007, 11:45:02 PM »
Sorry i didn't explain that very well.

The "CV feedrate" is the speed it will slow down to.

The "angular limit" is what angle and above is used to set the slower feedrate.

Chad


Re: Waterjet/lookahead/accelerate-slowdown
« Reply #5 on: February 10, 2007, 12:01:23 AM »
Thank you Chad.
Peter

Offline chad

*
  • *
  •  361 361
  • When the going gets weird, the weird turn pro.
    • View Profile
Re: Waterjet/lookahead/accelerate-slowdown
« Reply #6 on: February 10, 2007, 12:19:49 AM »
No problem


cHAD