Hello Guest it is March 29, 2024, 11:22:08 AM

Author Topic: Feed override for all axis motion commands  (Read 7238 times)

0 Members and 1 Guest are viewing this topic.

Offline MEA

*
  •  5 5
    • View Profile
Feed override for all axis motion commands
« on: February 27, 2013, 02:26:52 PM »
The implemented feed override is not working, so far I found out, during axis referencing or G31 probing.
With a feed override to zero before stop, I get a "smooth" stop. There are reasons to stop, not estop, during a movement.
I know, during a G-Code file run it is possible to do a smooth stop with the "feed hold" button even if the time to stop is not predictable.

Daniel
Re: Feed override for all axis motion commands
« Reply #1 on: March 14, 2013, 09:50:48 PM »
You can do what I think you’re talking about by pressing the Escape key while a G31 X4 F12 command is being executed. It also works in a probe macro with a G31. The axis move slows down and stops, like you pressed the “Feed Hold” in a G1 command move.