Hello Guest it is March 29, 2024, 10:52:06 AM

Author Topic: 2 Decimals DRO ?  (Read 4221 times)

0 Members and 1 Guest are viewing this topic.

2 Decimals DRO ?
« on: February 10, 2006, 04:33:05 PM »
Hello all,
On Mach3 V1.90.07 Can somebody tell me how to remove 2 decimals on all the DRO? 
On a machine in decimal read 0.0001mm is not realistic!  I would like to read 0.01mm I tested %+.2f format string with Screen4  but the DRO do not function any more after the modification!
Another way ?

Thanks for your help  :)
Francis
« Last Edit: February 10, 2006, 06:33:28 PM by ftissera »
Re: 2 Decimals DRO ?
« Reply #1 on: February 10, 2006, 05:15:47 PM »
Try this :)
%+.2f


If you need to have NO +- you can use this %.2f

Hope that helps
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: 2 Decimals DRO ?
« Reply #2 on: February 10, 2006, 05:48:27 PM »
Brian,

typo sorry, I just changed the "4" by "2" and left the other characters %+.4f becomes %+.2f it is all
With new screen in mach3 the display is +0.00 but the display is blocked to +0.00 when I jog  ???

After some tests when a DRO's modified with Screen4 it does not work anymore next even while giving it like as before

Thank you  :)
Francis

PS: I hope that you have not any neighbors, your dog is ferocious  ;D
« Last Edit: February 10, 2006, 06:08:40 PM by ftissera »
Re: 2 Decimals DRO ?
« Reply #3 on: February 11, 2006, 06:57:48 AM »
Brian,
today
1) reload my special 2 digits 1024ft.set in mach3.. don't work !
2) reload org 1024.set.. work fine !
3) reload another time my 1024ft.set and ... work fine   :-[

Don't understand but that work  ;D

Thanks
Francis 
Re: 2 Decimals DRO ?
« Reply #4 on: February 11, 2006, 07:03:17 AM »
It worked here when I tested it... I will keep an eye on it.
Thank you
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com