Hello Guest it is March 19, 2024, 06:57:04 AM

Author Topic: NCpod to Xylotex  (Read 9386 times)

0 Members and 1 Guest are viewing this topic.

Offline Greolt

*
  •  956 956
    • View Profile
NCpod to Xylotex
« on: April 13, 2008, 05:14:32 AM »
Anybody running an NCpod direct connect to a Xylotex driver board?

Wondering if there are any issues I should be aware of.

Presume I just connect step, direction and ground for each axis.

All limits, estop and outputs direct from NCpod to relevant purpose.

Greg

Offline Greolt

*
  •  956 956
    • View Profile
Re: NCpod to Xylotex
« Reply #1 on: May 03, 2008, 08:57:20 PM »
I did as I said above and it works fine.

Greg
Re: NCpod to Xylotex
« Reply #2 on: May 07, 2008, 02:00:03 AM »
Hi Greg,

All you need now is to get your ncPod to runyour spindle via a  DC-05 DigiSpeed-MC  :-)

http://homanndesigns.com/store/index.php?main_page=product_info&cPath=1&products_id=38

Cheers,

Peter.
----------------------------------------------------
Homann Designs
http://www.homanndesigns.com
email: peter at homanndesigns.com