Hello Guest it is October 16, 2019, 09:30:38 PM

Author Topic: Possible commercial application for machine control  (Read 5312 times)

0 Members and 1 Guest are viewing this topic.

Offline poppabear

*
  • *
  •  2,233 2,233
  • Briceville, TN, USA
    • View Profile
    • S S Systems, LLC
Re: Possible commercial application for machine control
« Reply #10 on: February 04, 2007, 08:46:40 PM »
Hey Paul,

    I have done what your talking about if you need some help. I made 2 Programable automated "Target Ranges" that use Mach to control stuff through PLC's with a HMI touch panel. I have also used it to run some pick and place machines and some other non-traditional machine tools.

The users of the program/screens/system, have NO clue that they are using a Machine controller. I live close to Knoxville, TN, so if you want me to swing by and show you how to set up, and do stuff let me know.

Here is my email replace the "at" with "@"      PoppaBear@hughes.net

Scott 
Commercial Mach3 & Mach 4, Design/Build/Retrofit CNC and Industrial machines.
http://www.ss-systems-llc.com/