Yes just use the OEM codes for the LEDs for them, similar idea as before, if LED is on then switch the output, if its off then switch it off. You could also do similar with the step increment outputs, ie if you have the following instead of what you already have
,
If GetOemDRO(828)=1 and GetOemLED(15) Then
ActivateSignal (OutPut1)
ActivateSignal (OutPut4)
Else
DeActivateSignal(OutPut1)
End If
If GetOemDRO(828)=0.1 and GetOemLED(15) Then
ActivateSignal (OutPut2)
ActivateSignal (OutPut4)
Else
DeActivateSignal(OutPut2)
End If
If GetOemDRO(828) and GetOemLED(15)=0.1 Then
ActivateSignal (OutPut3)
ActivateSignal(OutPut4)
Else
DeActivateSignal(OutPut3)
End If
Hood