Hello Guest it is November 16, 2019, 06:30:22 PM

Author Topic: Need to know who has DSPMC and mach3 on a lathe  (Read 1699 times)

0 Members and 1 Guest are viewing this topic.

Offline dresda

*
  •  222 222
    • View Profile
Need to know who has DSPMC and mach3 on a lathe
« on: January 23, 2013, 03:25:47 PM »
As the title says, Who is using DSPMC and Mach3 on a lathe using DC motors. not getting any help from Vital systems.
ray.
Re: Need to know who has DSPMC and mach3 on a lathe
« Reply #1 on: January 24, 2013, 05:49:56 AM »
Hi Dresda,
I would love to help out but I don't have the DSPMC setup on a lathe yet. I was almost there but then I needed the DSPMC for another mill I was working on. What exactly are you trying to do and I may be able to do some testing here to see if I can help.

Mike
We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.

Offline dresda

*
  •  222 222
    • View Profile
Re: Need to know who has DSPMC and mach3 on a lathe
« Reply #2 on: January 24, 2013, 07:28:25 PM »
It's the treading function on the lathe I need to about.
Thanks.
Re: Need to know who has DSPMC and mach3 on a lathe
« Reply #3 on: January 25, 2013, 04:15:57 AM »
I may be able to get the DSPMC setup on the lathe next weekend but you know scheduling goes.
Mike
We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.