Hello Guest it is March 28, 2024, 08:41:17 AM

Author Topic: Voice question  (Read 3155 times)

0 Members and 1 Guest are viewing this topic.

Offline lew

*
  •  74 74
    • View Profile
Voice question
« on: January 30, 2007, 09:29:49 PM »
I've been going through the pdf manual for Mach 3 and ran across the voice function. If I'm reading it right, a person can initiate a wav file to audibly draw attention to a trigger. Perhaps a machine pause or reset needed or limit switch triggered. Can anyone tell me the details of calling a wav file? Can it be done from within a gcode program. Specifically, I'd like to call an M01 (program pause) and give an audible command like "change the part" or "change the tool". Can this be done? and, if so, how?
Thanks
LEW

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Voice question
« Reply #1 on: January 31, 2007, 03:36:44 AM »
Without engineers the world stops

Offline lew

*
  •  74 74
    • View Profile
Re: Voice question
« Reply #2 on: January 31, 2007, 09:28:57 AM »
Thanks for the useful info., Graham.
LEW