hi from france, someone can explain me how it work?

http://www.machsupport.com/plugins.php


because i need a plug in for recording a gcode, with the jog (motion for arm robot)7

thanks

Download the file, then run (double click) the saved ‘jcode.m3p’
Within Mach3:- Config / Config Plugins enable JCode
Restart Mach3
Title Bar :- select   Jog -> GCode / Record Jogs / select File / set Feedrate

Return focus to Mach screen and jog axis to required position
select Record Point

Repeat the above 2 operation as necessary (you may need a few hours to spare here  )
Then click OK to save the GCode.

This plugin has perhaps been superseded by the improved ‘Copy Cat’ wizard which is a lot easier to use but unfortunately requires the NFS Wizards licence.

Tweakie.

You can also see a tutorial video here (click on the JCode link on the left):

http://www.machsupport.com/videos/

Dave

thanks very much, but i have a question


how we can do for record the 6 axis? (xyzabc)


because actually it record only xyz, it s a good start, but i need to record the 6 axis for my arm robot

I am afraid you will have to write your OWN application for that.

(;-) TP

We cant modify this plug in?

I have never write or open a plug in

if i open the plug in with vs20XX, i can maybe modify something? i don t know how that work