Hello Guest it is March 29, 2024, 07:26:13 AM

Author Topic: My notes for 5 axis post  (Read 20985 times)

0 Members and 1 Guest are viewing this topic.

My notes for 5 axis post
« on: February 07, 2006, 12:58:02 PM »
In attachement I have compiled information I have collected for my 5 axis postprocessor.
My machine is gantry with 2 axis head.
Head have B axis (rotates around Y axis) and C axis (rotates around Z axis).
I did choose easiest way and did make adjustable head geometry so that B and C axis intersections eachothers, this way it is only needed to calculate X, Y and Z axis transformation according tool tip distance from pivot point and rotary axis angles.

Some problems are still not solved eg. tool tip following error changes according tool lenght.

Regards Mika

Offline chad

*
  • *
  •  361 361
  • When the going gets weird, the weird turn pro.
    • View Profile
Re: My notes for 5 axis post
« Reply #1 on: February 07, 2006, 01:29:33 PM »
Hi, I am also building a 5 axis gantry router. Thanks for the file. Do you have any pictures of your machine? i would love to see them.

chad

ynneb

*
Re: My notes for 5 axis post
« Reply #2 on: February 07, 2006, 11:05:21 PM »
Thanks for posting that. While it is way beyond me, I would suspect it will help a lot of others.