Mach Discussion > Finished Plugins for Download

A new Huanyang VFD plugin

(1/38) > >>

royaumedeole:
Hi all!

Facing some problems with Matty Zee plugin, i decided to write my own plugin:

features:


* Start/stop of the spindle
* RPM monitoring through system DRO(39), no need to modify screen set
* Takes into account the rated speed 50hz declared in the VFD (PD144). Thus, the driver will be able to handle any kind of motor, not just those that run at 3000rpm @ 50hz .. You just need to configure your VFD on the right way.
* Can Manage the pulley system. If we set the option, the calculation of the RPM will be done using ratio declared in Mach3. Indeed, the first driver is specific to chinese spindle, the pulley system was useless. But on my RF45 or other machine whith a gearbox, spindle speed depends on the gear … But it is the speed of tool that interests us, not the motor …
* Finally, if the spindle stops (eg you press the stop button on the VFD), it causes an emergency stop in Mach3


Here is th link to my page.
It contains decription, download link and setup informations

http://royaumedeole.fr/informatique/plugin-mach3-pour-vfdhuanyang/mach3-plugin-for-huanyang-vfd/

Hoping it to be helpfull to another people

this Plugin is still in development and may still contains some minor bugs. Do not hesitate to contact me and I  will correct it.


Finally , a small video on youtube to see it in action
http://youtu.be/3TbeSifxr_A

theminor:
Wow thanks! I look forward to testing this out. The E-Stop issue is a big one - that will be a welcome addition for sure. All the other features look nice too!

I have one request - the old Huanynag VFD plugin allowed implementing a DRO to show the Amperage draw from the VFD. I really like this feature and use it via a custom DRO on my screenset. Do you think you could add this option to your version? That would make it perfect IMO!  ;)

Thanks in advance!

royaumedeole:
Hello,

I'll be happy to add such feature.

In fact, the driver i have developed is able to get this information. As it was useless for me, i decided not to integrate it to the default version. So, as you seem to be interested by this functionnality, i'm going to modify the plugin so that you can get the current on the user dro you want.

I'll update this post as soon as it is ready. (before the end of week i think)

if you test it, do not hesitate to give me a feedback if you're facing problems, bugs. I'll correct plugin and update documentation.

theminor:
Fantastic! Looking forward to it! Thanks a ton!

royaumedeole:
hello Theminor,

I have updated the plugin.
I have rewritten the communication code between VFD and mach3 because it was still buggy and I was not satisfied with the quality of the source code.
 
Below the features I add:


* Monitor one or more Vfd status variable (out frequency,current,speed,ac or dc voltage) by mapping them to user DRO.
* Define some limits fot those status variable.A Estop will be triggered as soon as the limit has been reached. For example, you could define a limit to 10A for the current. If the plugin detects that current is 10.1A then an Estop will occur. it’s an easy way to protect your VFD

Here a screenshot of the configuration screen



I put the new plugin version as an attachment.

Prerequisites, setup and configuration can be found at

http://royaumedeole.fr/informatique/plugin-mach3-pour-vfdhuanyang/mach3-plugin-for-huanyang-vfd/

It's working on my side but i have not modify my screenset to check that current and so on are displayed.

I hope that some user will test it to give me a feedback.

Navigation

[0] Message Index

[#] Next page