Hello Guest it is March 28, 2024, 07:33:05 AM

Author Topic: Please look at my xml file and tell whats wrong.  (Read 2466 times)

0 Members and 1 Guest are viewing this topic.

Please look at my xml file and tell whats wrong.
« on: October 08, 2012, 07:50:14 PM »
I have mach 3 running on a small 3 axis router through a Gecko 540, I have had this system running with a hobbycnc board, I have all motors running and moving properly, all limit and home switches work but when I call for reference all, the motors move at a snails pace and growl loudly. Sounds like they are getting very low voltage?? I must have missed something in the ports and pins setup. If you see something wrong please let me know, I am stumped.
Thanks for any help you can offer
Terry

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Please look at my xml file and tell whats wrong.
« Reply #1 on: October 08, 2012, 07:58:23 PM »
All your axis are set to a maximum speed of 25ipm, and the homing speeds are 20% of that (50% for the X).

You need to set up the acceleration and velocity for all your axis in Motor Tuning.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Please look at my xml file and tell whats wrong.
« Reply #2 on: October 08, 2012, 08:08:56 PM »
Thanks a milliion Gerry, my brain just was stuck on stupid and I couldn't see it. Really appreciate your help.
Terry