Hello Guest it is October 24, 2019, 01:18:38 AM

Author Topic: PROBLEM WITH TANGENTIAL KNIFE  (Read 1363 times)

0 Members and 1 Guest are viewing this topic.

PROBLEM WITH TANGENTIAL KNIFE
« on: September 05, 2012, 09:34:34 AM »
Hi to all..!!

First of all my apologies for my ugly english...
I have a CNC Router working fine with 4 axis, where A axis its angular and have a cutter blade as tool

The machine work very well and accurate, but the A axis rotate after Z is down with blade touching the material.
Any of you could to teaching mo to setup Mach3 to rotate the A axis before Z down?

Thanks to all.
Re: PROBLEM WITH TANGENTIAL KNIFE
« Reply #1 on: September 06, 2012, 06:41:20 PM »
Hi there,
try a negative Z axis value during cutting eg. ( Z -0.1 ) in your g code
not positive.

Alex