Hello Guest it is July 19, 2019, 06:47:46 AM

Author Topic: Forgetting last tool position after restart  (Read 1416 times)

0 Members and 1 Guest are viewing this topic.

Offline kak

*
  •  73 73
    • View Profile
Forgetting last tool position after restart
« on: August 02, 2012, 03:38:40 PM »
I got another PC for my cnc and Mach3 doesn't remember the last tool position when I start the software the next day. My old PC didn't do that.
Sometimes I'm forgetting to Zero the axis and when something goes wrong, like loosing steps, I loose my zero.
I can`t find anything about it in settings.

And is it normal that I can`t jog with 3 axis at the same time? Sometimes I can, but usually just 2. I did try with 2 different PCs.

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Forgetting last tool position after restart
« Reply #1 on: August 02, 2012, 04:08:28 PM »
General Config page has options for making DROs persistent.
As for Jogging then you should be able to jog all 3 at the same time assuming you have not come against a soft limit on an axis.
Hood