Hello Guest it is November 21, 2019, 05:37:46 PM

Author Topic: z in gcode  (Read 2818 times)

0 Members and 1 Guest are viewing this topic.

z in gcode
« on: July 30, 2012, 08:41:06 PM »
I am able to post my dxf file to gcode in lazycam....but when i open it in Mach3.....the z starts goes to 60 and then goes all the way back to 0 before anything actually happens....how do i get it to stop doing this?

Offline RICH

*
  • *
  •  7,371 7,371
    • View Profile
Re: z in gcode
« Reply #1 on: July 31, 2012, 06:57:17 AM »
Have a read of  Tutorial #6 in the manual.
RICH