Hello Guest it is March 28, 2024, 03:50:14 PM

Author Topic: Running more than One Macro Pump  (Read 2430 times)

0 Members and 1 Guest are viewing this topic.

Running more than One Macro Pump
« on: July 16, 2012, 11:36:04 PM »
I need a little more clarification about macro Pumps? I have successfully created 1 named macropump.m1s how ever how does a person run more than one and name differently? tried naming servofault.m1s but just came up with nothing or error in message box      

If IsActive(INPUT1) Then
     Message "X servo motion fault"
    DoOEMButton (1003)
    End If    
        If IsActive(INPUT2) Then
         message "Y Servo Motion Fault"
         DoOEMButton (1003)
         End If
       
           

Thanks
« Last Edit: July 16, 2012, 11:38:02 PM by Cncman2nv »
Adam
Re: Running more than One Macro Pump
« Reply #1 on: July 17, 2012, 02:56:57 AM »
Hi,

You can only run 1 macropump and it needs to be named macropump.m1s

Just put it all in the one file.

Cheers,

Peter
----------------------------------------------------
Homann Designs
http://www.homanndesigns.com
email: peter at homanndesigns.com