Hello Guest it is July 21, 2019, 09:39:50 AM

Author Topic: CNC Router step issues  (Read 2189 times)

0 Members and 1 Guest are viewing this topic.

CNC Router step issues
« on: January 14, 2007, 05:17:54 PM »
Hi all I am trying to troubleshoot missing step and stall issues I have with a CNC Router I built.  For background and troubleshooting to date see my thread at http://www.cnczone.com/forums/showthread.php?t=26792.

Attached is a zip of a quicktime move which shows a 30 sec extract of the driver test.  I don't see any spikes but I do see "noise" which comes and goes on a fairly regular cycle.  Could this be causing me problems?

The PC is a 1.6Ghz P4 running on a mini-atx flex motherboard.

Thanks

David

Offline rcrabb

*
  •  146 146
    • View Profile
Re: CNC Router step issues
« Reply #1 on: January 14, 2007, 06:58:10 PM »
To save us some time reading your tread over at the Zone can you take some time and tell us here exactly your problem and what things you tried already to solve it?
Ryan
Re: CNC Router step issues
« Reply #2 on: January 14, 2007, 09:24:49 PM »
Driver test looks okay... I think it is time to start looking for noise in the system :(
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com