Hello Guest it is October 11, 2024, 10:54:09 AM

Author Topic: Need Help Direction Control  (Read 2551 times)

0 Members and 1 Guest are viewing this topic.

Need Help Direction Control
« on: May 26, 2012, 05:34:36 PM »
Hi All, My name is Mark and I live in Tucson Arizona. I have a 4' x 4'
cnc router I believe its a Private made or home built machine that is using
Keling Technologies nema 23 H2100-30-4B stepper motors and Keling microstep drivers KL-5042 with Sound Logic breaker board.

The problem is (and I have been using this machine for a year, without incident) is that today when It cuts a part it goes the wrong direction in
the X axis only and only about half the time. Kind of it or miss. I tried
swapping motors with the same result and swapped out the drivers with the
same result. Checked all wires for tightness. and havent a clue what to do now. when moving in the X axis with the keyboard if I press left it goes left
stop and press left again and it goes left stop and press left again and it goes
Right. Hmmm. There seems to be no pattern I can discern. I am a woodworker
by trade and not a computer guy or a machine fix it guy. A newbie...

Any Ideas?? or is there anyone near Tucson, can and will be happy to pay for help.

Also I am using mach 3 with a computer running XP

any help greatly appreciated.
Re: Need Help Direction Control
« Reply #1 on: May 26, 2012, 05:35:05 PM »
Hi All, My name is Mark and I live in Tucson Arizona. I have a 4' x 4'
cnc router I believe its a Private made or home built machine that is using
Keling Technologies nema 23 H2100-30-4B stepper motors and Keling microstep drivers KL-5042 with Sound Logic breaker board.

The problem is (and I have been using this machine for a year, without incident) is that today when It cuts a part it goes the wrong direction in
the X axis only and only about half the time. Kind of it or miss. I tried
swapping motors with the same result and swapped out the drivers with the
same result. Checked all wires for tightness. and havent a clue what to do now. when moving in the X axis with the keyboard if I press left it goes left
stop and press left again and it goes left stop and press left again and it goes
Right. Hmmm. There seems to be no pattern I can discern. I am a woodworker
by trade and not a computer guy or a machine fix it guy. A newbie...

Any Ideas?? or is there anyone near Tucson, can and will be happy to pay for help.

Also I am using mach 3 with a computer running XP

any help greatly appreciated.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
Re: Need Help Direction Control
« Reply #2 on: May 26, 2012, 05:55:41 PM »
I would take a guess that you got a pirate version of Mach with the router and that is causing the problem.
Hood