Hello Guest it is March 28, 2024, 07:27:22 PM

Author Topic: opening an m1s file  (Read 4468 times)

0 Members and 1 Guest are viewing this topic.

opening an m1s file
« on: April 28, 2012, 09:24:17 AM »
Hello Jimpinder--
I am trying to figger out macros and I came across some replies of your which included
the following files

m202.m1s

1024.lset

m201.m1s

Please tell me how to open and use these files
Many thanks

fred evans
think of the trees-- use both sides of the computer paper

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: opening an m1s file
« Reply #1 on: April 28, 2012, 06:33:50 PM »
Hmm....haven't heard from Jimpinder in some time........

- 1024.lset is a standard "screen set" for the lathe ulness Jimpinder modified one with the same number  ???
- m202 & m201.m1s are macros and can be called from within a program file or via the MDI line.

On the top of the screen select Operator> VB Script Editor then select the macro and you will be able to see the coding if so desired.
 

RICH
« Last Edit: April 28, 2012, 06:39:17 PM by RICH »
Re: opening an m1s file
« Reply #2 on: April 29, 2012, 07:27:20 AM »
thanks rich-- will try it tomorrow at work

regards

fred
think of the trees-- use both sides of the computer paper

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: opening an m1s file
« Reply #3 on: April 29, 2012, 07:38:47 AM »
You can also open .m1s files in any text editor. Notepad, Worpad, Word, ....
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html