Hello Guest it is April 14, 2021, 09:53:17 PM

Author Topic: Lazy Cam and this cnc  (Read 2156 times)

0 Members and 1 Guest are viewing this topic.

Lazy Cam and this cnc
« on: April 06, 2012, 09:43:05 AM »
Hello I like to get a cnc to make PCB. I found this on ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180735260345&ssPageName=ADME:X:AAQ:US:1123

So do any know that LazyCam will work whis cnc or do I need another controller?

//mads

Offline Tweakie.CNC

*
  • *
  •  8,692 8,692
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Lazy Cam and this cnc
« Reply #1 on: April 06, 2012, 11:19:47 AM »
Hi Mads,

The machine supplier says it runs from GCode and LazyCam outputs GCode so there should be no problem using this machine with Mach3 for routing PCB's.

Tweakie.
KEEP SAFE !
Re: Lazy Cam and this cnc
« Reply #2 on: April 07, 2012, 08:08:53 AM »
Okay thanks for you´re reply

Offline Tweakie.CNC

*
  • *
  •  8,692 8,692
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Lazy Cam and this cnc
« Reply #3 on: April 07, 2012, 08:16:28 AM »
Hi Mads,

There are quite a few free PCB routing programs about and this may be of interest to you http://www.pcbgcode.org/

Tweakie.
KEEP SAFE !
Re: Lazy Cam and this cnc
« Reply #4 on: April 08, 2012, 08:48:41 AM »
Okay thanks