Hello Guest it is July 20, 2019, 01:51:46 AM

Author Topic: Mach lathe losing position  (Read 6464 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Mach lathe losing position
« Reply #20 on: April 05, 2012, 05:42:16 PM »
Good to hear, having too much in backlash will make it travel too far on reversals. Best to measure what backlash you actually have with a clock and enter the correct value if you want to use comp.