Hello Guest it is October 16, 2019, 11:31:53 PM

Author Topic: Using Mach3 with a Denford mirac PC lathe  (Read 7789 times)

0 Members and 1 Guest are viewing this topic.

Re: Using Mach3 with a Denford mirac PC lathe
« Reply #10 on: March 20, 2012, 09:27:17 AM »
Try this site: http://www.denfordata.com/bb/viewforum.php?f=40

To use Mach3 you would have to get to the actual stepper drivers in the Denford electronics, which might be possible, I think people have done it - but see the Denford forum.  I have converted a Denford Novamill which I bought without electronics to use Mach3, building up a set of drivers and breakout board.  Works very well.  Denfords are excellent machines.

John.

Offline DonH

*
  •  19 19
    • View Profile
Re: Using Mach3 with a Denford mirac PC lathe
« Reply #11 on: May 03, 2012, 04:23:25 PM »
Hi Matchless,

Try this site  http://www.mycncuk.com/forums/showthread.php/1764-Denford-Mirac-Electronics-Refurbishment?highlight=mirac

I too have a mirac to modify & live in the UK Midlands,

Don