Hello Guest it is December 01, 2021, 10:20:47 AM

Author Topic: Toolpath Highlight  (Read 1881 times)

0 Members and 1 Guest are viewing this topic.

Toolpath Highlight
« on: February 17, 2012, 06:21:04 PM »
Isn't there a way to have the path highlight as you scroll through the gcode in the toolpath window.  i look for settings but could not find anything.  Thought I did it before but it was a long time ago.

TIA

Dan
Re: Toolpath Highlight
« Reply #1 on: February 17, 2012, 10:26:21 PM »
Re: Toolpath Highlight
« Reply #2 on: February 17, 2012, 10:30:39 PM »
You can also select "Lines from Last to Current"  under Config / ToolPath.
This will keep lines highlighted when running the part program.
Russ