Hello Guest it is June 18, 2024, 08:31:57 PM

Author Topic: What should I see in the "Diagnostics Alt-7" window if Mach3 configured properly  (Read 18603 times)

0 Members and 1 Guest are viewing this topic.

Offline Blu

*
  •  5 5
Hood,

At the diagnostics window the "Time in Int." idles at ~3.5 without any G Code.  When I enter G Code or use the servo frequency generator the "Time in Int." fluctuates between 3 to 10. 

Throughout all commands the pulse frequency flutters just below 25KHz.

Blu

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
That sounds like the driver is working well. Not sure why you would see such changes when jogging X axis only
Hood