Hello Guest it is March 28, 2024, 02:29:10 PM

Author Topic: Axis not reffed  (Read 2673 times)

0 Members and 1 Guest are viewing this topic.

Axis not reffed
« on: January 09, 2012, 03:30:56 PM »
I'm not sure if I'm in the correct area here but maybe someone can help me.
My screen shows "AXIS NOT REFFED TO NORMALL CONDITIONS'

I have inductive proximity switches on all 3 axis. (but only at one end) They work fine. I can home and ref to them all no problem. I'm just not sure what the error message means.

My machine works fine and has been for quite some time. Clearly I have something in my setup wrong.

Thanks in advance.

George

One step at a time!

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Axis not reffed
« Reply #1 on: January 09, 2012, 04:56:10 PM »
Are the LEDs at the side of the axis green?
Hood
Re: Axis not reffed
« Reply #2 on: January 10, 2012, 01:10:30 PM »
Yep!

Al 3 boxes X,Y and Z are Green.

Cheers

George
One step at a time!

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Axis not reffed
« Reply #3 on: January 10, 2012, 01:45:33 PM »
Then if everything is as it should be just double click the abnormal condition and tell it that is actually a normal one :-)
Hood
Re: Axis not reffed
« Reply #4 on: January 12, 2012, 06:38:00 AM »
That seemed to do the trick, many thanks  ;D
One step at a time!