Hello Guest it is June 16, 2024, 02:38:04 AM

Author Topic: Mach3 momentarily losing its place...  (Read 2014 times)

0 Members and 1 Guest are viewing this topic.

Offline Chet

*
  •  58 58
Mach3 momentarily losing its place...
« on: December 06, 2011, 03:13:17 PM »
I've run into a new problem with my Mach3 which is running my CNC router.
For a period of 15 minutes or so, the cut became totally distorted with all X, Y, and Z axis movement shifted...
But it then resumed cutting correctly!!!!
The only variable I can think of was the use of a nearby portable electric drill...
I'm going to try and attach a photo of the problem.
Any insight will be appreciated!
Chet