Hello Guest it is October 21, 2019, 05:01:57 PM

Author Topic: Can't clear emergency condition  (Read 3550 times)

0 Members and 1 Guest are viewing this topic.

Re: Can't clear emergency condition
« Reply #10 on: November 18, 2011, 05:32:27 PM »
Hi Just an update.

Embarassingly, it seems to have been a wiring or switch fault on the e-stop. Arturo suggested I just use a short wire link on the board estop terminals to eliminate any potential wiring issues. The problem cleared immediately.

Strange though, I thought I had done the same a couple of days ago before posting on here.

Still nothing moving but at least the board seems to be responding. I can hopefully work through the rest over the next few days.

Thanks very much for the help & advice.

Paul

Offline Hood

*
  •  25,856 25,856
  • Carnoustie, Scotland
    • View Profile
Re: Can't clear emergency condition
« Reply #11 on: November 18, 2011, 06:12:38 PM »
Good news and dont be embarrassed these things happen to everyone :)
Hood