Hello Guest it is March 28, 2024, 05:03:34 AM

Author Topic: Z position change after load the NC program  (Read 2920 times)

0 Members and 1 Guest are viewing this topic.

Z position change after load the NC program
« on: March 07, 2013, 09:57:43 PM »
Guys,
I have a problem with my Mach3 program. Every I load a new program, the Z coordinate will be changing to a certain value.
Please give me your advice for this problem.
Thanks,
Giana

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Z position change after load the NC program
« Reply #1 on: March 08, 2013, 04:06:42 AM »
Hi Giana,

Everybody uses their machines differently but, because I do not use fixture offsets, I uncheck all the DRO related boxes in this part of the General Config. window - this maintains all DRO's at zero on startup and when loading new programs.

I don't know if this helps with your problem.

Tweakie.
PEACE