Hello Guest it is August 19, 2019, 06:43:51 AM

Author Topic: Intermittent movement along toolpath  (Read 4092 times)

0 Members and 1 Guest are viewing this topic.

Re: Intermittent movement along toolpath
« Reply #10 on: November 09, 2011, 04:21:20 PM »
I know its an old post, but I've experience the same problem with a 8 year old acer centrino notebook using windows xp.
When using manual jogging the movement its fine and smooth, but when running the program it stops every second, a short time and continue until finish, annoying.
The way I solve this is changing the LPT1 port properties in BIOS. Before was an EPP port. I changed it to ECP+EPP using a DMA and works like a charm.
Hope this help. See you.