Hello Guest it is March 28, 2024, 08:37:01 AM

Author Topic: Chinese Remote Controller  (Read 3127 times)

0 Members and 1 Guest are viewing this topic.

Chinese Remote Controller
« on: October 28, 2011, 12:38:25 PM »
Ok, so I bought this remote contrller off of ebay ;D , I checked and saw that there had been good feedback left ;). It arrived today and looks really good for the price, but if the buttons don't do anything its of no use to me.
I plugged it in to a USB port and the power light comes on, but thats the end of the good news! I don't want to put it down because I am pretty sure that its me who does't know how to connect it up to Mach3.
I have done everything it says in the instructions, which is simply to plug it in and then re-config the hotkeys, but no joy. I would expect that it needs to be aligned with something in Mach3, but what?
Can anyone throw some happiness my way please, I would love this thing to work. ???
Re: Chinese Remote Controller
« Reply #1 on: October 28, 2011, 01:51:48 PM »
"this remote contrller off of ebay" doesn't give us anything to work with....
Regards,
Ray L.
Re: Chinese Remote Controller
« Reply #2 on: October 28, 2011, 05:25:36 PM »
sorry, I was going to try and paste the page in but could'nt. The link below is the one in question.

http://www.ebay.co.uk/itm/MACH3-CNC-USB-Manual-Remote-Controller-U1-/330628965926?pt=UK_BOI_Industrial_Automation_Control_ET&hash=item4cfb05a626

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Chinese Remote Controller
« Reply #3 on: October 28, 2011, 05:32:41 PM »
Looks like it must just be emulating a keyboard so all you should have to do is go to Config menu then System HotKeys and then press the X++ on that page and when the box pops up press the key on the pendant for X+ and then do the same for the others. For E-Stop  etc I presume the keys must correspond to the hotkey assignment in Mach so should work fne if you use a standard screenset.

Personally I would never rely on it as a sole E-Stop but may be ok if used as an additional one.
Hood

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Chinese Remote Controller
« Reply #4 on: October 28, 2011, 06:35:00 PM »
This may be of some interest to you-  :)

http://www.youtube.com/user/cncnutz#p/a/u/0/Mnum5PgvHWw

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)
Re: Chinese Remote Controller
« Reply #5 on: October 29, 2011, 08:29:45 AM »
Thanks, it looks like the unit is faulty, because windows is supposed to detect it automatically, but I have tried it on 3 PC's and no luck. I will have to send it back and try again, it's just my luck because it seems no-one else has had this problem.