Bunches of real useful information here.
Go to
www.lowrynightsights.com, then scroll down to the bottom of the page and click on the Bridgeport Manuals link.
Mastercam X thru X5 Post file. Enables the use of the Mach3 Mill tool table on a CNC mill which has no automatic tool changer. I have put some effort into this Mastercam Post, and it should do the trick for most people who have a Kwik-Switch or other type tool changer.
Also have these files and information freely available.
How to convert a Bridgeport Boss 6 to Mach3.
m3.m1s
m5.m1s
macropump.m1s
How to setup a Tool Table and Tool Change in Mach3.
Mastercam 9 to Mach 3 tutorial.
Series II CNC Maintenance Manual.
Series II CNC Operating Manual.
Series II CNC Programming Manual.
SERIES-1-CNC-PROGRAMING-MANUAL.
Bridgeport Series I CNC Program Entries Descriptions.
NC-Programming-Sheet.
Bridgeport-BOSS-G-Codes.
R2E4 CNC.
EZ-FILE.
Student Manual.
Enjoy!
Charles