Hello Guest it is January 28, 2022, 05:45:25 PM

Author Topic: pocketing problem  (Read 1162 times)

0 Members and 1 Guest are viewing this topic.

pocketing problem
« on: December 04, 2018, 11:25:14 AM »
I am using the laser post. When i engrave lines it works fine. When i use the pocketing function it adds a bunch of concentric circles to the toolpath when i load it to Mach. In the lazycam screen everything looks correct.

Offline Tweakie.CNC

*
  • *
  •  8,882 8,882
  • Super Kitty
    • View Profile
Re: pocketing problem
« Reply #1 on: December 05, 2018, 01:48:02 AM »
In Config / General Config.   change the IJ Mode.

Ideally, all Gcode files containing arcs should specify the G90.1 or G91.1 (as appropriate).

Tweakie.
KEEP SAFE !
Re: pocketing problem
« Reply #2 on: December 05, 2018, 05:10:40 PM »
That was it.
Thanks,
Gene