Hello,
I need the help. Right now I have two spindle on Z- axis. If I fill MDI on mach3 screen with M03,two spindles will rotate simultaneously.
I'll assume you have BOTH spindles activated/connected via OUTPUT1.
First connect your second spindle to OUTPUT6 (for example) instead.
Now M03 will only activate spindle 1.
Now create another macro (say) M102 with this line...
activateSignal(OUTPUT6).
Then ADD the following to M05
deactivateSignal(OUTPUT6)
Now M03 will turn on spindle 1 and M102 will turn on spindle 2 and M05 will turn off whichever one/or both is on.
(remember to setup OUTPUT6 (or whichever) in ports n pins)
Cheers
Ian