Hello Guest it is March 29, 2024, 07:54:36 AM

Author Topic: spindle pwm pin assignment other then #2-#9?  (Read 2474 times)

0 Members and 1 Guest are viewing this topic.

spindle pwm pin assignment other then #2-#9?
« on: July 29, 2011, 12:38:17 PM »
Can I use pin #1, #14, #16 or #17 for Spindle PWM output properly at 1KHz base Freq.?
pins #2-#9 are high speed output but I couldn't find any information about timing of other outputs of mach3 in the documents.

Thanks...

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: spindle pwm pin assignment other then #2-#9?
« Reply #1 on: July 29, 2011, 05:21:05 PM »
Last I knew ALL output pins are HIGH speed. They can run at the kernal Freq.

Just a thought, (;-) TP
Re: spindle pwm pin assignment other then #2-#9?
« Reply #2 on: August 05, 2011, 03:15:44 AM »
thanks for your comment