Hello Guest it is June 24, 2024, 05:37:00 AM

Author Topic: onwers manual  (Read 5087 times)

0 Members and 1 Guest are viewing this topic.

onwers manual
« on: December 09, 2006, 05:28:52 AM »
I'm verry hew to cnc,and bought a magnum technology wood cnc late,and am looking for a owners manual,or pay for a copy of it,
they are out of business and I need help,any ideals besides this site(witch it too advanced for me right now)ordered some books,any help would be great
my goal is duck calls been turning them on a wood lathe then finishing them up on a metal lathe.
One last question for now the cutting bit that it came with is no good so I want to try to put a tool post(like the taig-sold threw Lee Valey)will that be a big problem?
the new tool bost it taller than what is in my machine now.



Offline Graham Waterworth

  • *
  •  2,692 2,692
  • Yorkshire Dales, England
Re: onwers manual
« Reply #1 on: December 09, 2006, 09:25:57 AM »
The tool post overall height is not important, the height of the cutting tip is, as long as the cutting tip is on the center of the spindle all will be ok.

If the tool is above centre it will rub the work and not cut.

If the tool is below it will cut but when you go from a small diameter to a larger one the size will be wrong.

I don't have one of these machines but what do you need to know about the machine. We may be able to help anyway.

Without engineers the world stops
Re: onwers manual
« Reply #2 on: December 11, 2006, 11:05:18 AM »
Think I got lucky a buddy's son works at a cnc shop and has offered to  help my problem now is finding the plug to go from the cnc to my computer,tryed dell,fry's,radio shack
but they do not sell a 25 pin plug,got any ideals?



Offline Chaoticone

  • *
  •  5,624 5,624
  • Precision Chaos
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: onwers manual
« Reply #4 on: December 15, 2006, 07:50:53 AM »
I get stuff like that from:
Fixing problems one post at a time ;)