Hello Guest it is March 29, 2024, 07:01:20 AM

Author Topic: DC-03 DigiSpeed GX V3  (Read 3154 times)

0 Members and 1 Guest are viewing this topic.

DC-03 DigiSpeed GX V3
« on: July 07, 2011, 04:01:01 PM »
Hello Everyone,

I just got at DC-03 DigiSpeed GX V3 to control my chinese C02 laser. I want to use Mach 3 or EMC2.

Has anybody gotten it running? What is the wiring diagram? Which pins do you use on the parallel port?

Here's a picture of it: http://mambohead.com/2011/07/laser-controller-design/

I will get through it eventually but if someone already has it working perhaps they could share what they did?

Thanks in advance!

Darcy

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
DC-03 DigiSpeed GX V3
« Reply #1 on: July 08, 2011, 02:47:01 AM »
Darcy,

This is a pretty old thread but it is straightforward enough to connect the analog 0-5Volts to the laser PSU and it is again straightforward to setup the spindle control within Mach to output the PWM (do a search for PWM and you will find the details). This works just fine for vector cutting but if you decide to do raster work using the Impact/Laser Engraver plugin it all goes pear shaped.
There are more details in these threads (if you have a bit of time to spare  :D );

http://www.machsupport.com/forum/index.php/topic,16446.0.html

http://www.machsupport.com/forum/index.php/topic,12444.0.html

Hope this helps,

Tweakie.
PEACE

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: DC-03 DigiSpeed GX V3
« Reply #2 on: July 08, 2011, 07:23:05 AM »
generlsocial - as Tweakie said, you ressurected a pretty old thread here so I've split it out and given you your own. Welcome BTW.