Hello Guest it is March 29, 2024, 08:50:21 AM

Author Topic: Pulse Frequency  (Read 3748 times)

0 Members and 1 Guest are viewing this topic.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Pulse Frequency
« Reply #10 on: February 23, 2018, 03:30:44 PM »
That would be in inches, as ±600 accel is roughly 1.5G.

So an accel of 20 and a velocity of 200-400 would be more reasonable.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html