Hello Guest it is March 28, 2024, 03:46:39 PM

Author Topic: DC spindle motor  (Read 4054 times)

0 Members and 1 Guest are viewing this topic.

Offline sml

*
  •  33 33
    • View Profile
DC spindle motor
« on: May 19, 2011, 07:12:56 PM »
Hi to all

I want use Mach3 for control a cnc machine with below specification :

Spindle : DC motor - permanent magnet - 400 watt  at 3600 rpm - 90 volt - 4 amper.

Axis motor : stepper motor - 5 phase - 10 wire - 16 kgf.cm - 1.4 amper.

What board do you suggest for control this spindle and axis motor? I don't know how can i control the spindle motor?
Can some one help me.
Does any board can control this spindle directly?

Please help me

Thank you
Re: DC spindle motor
« Reply #1 on: May 19, 2011, 09:04:12 PM »
Hi,

THe spindle motor is best controlled by a DC motor controller such as the KBIC-120 by KB electronics
http://www.kb-electronics-controls.com/_product_15408/9429_-_KBIC-120
http://www.plccenter.com/Buy/KB%20ELECTRONICS/KBIC120


or one like this that is very popular;
http://www.surpluscenter.com/item.asp?item=11-2269&catname=electric

With one of these controllers, you can then use a PWM to control voltage converter such as the DC-03V3 DigiSpeed  (That  I sell) to control the spindle speed from Mach3.
http://www.homanndesigns.com/store/index.php?main_page=product_info&cPath=1&products_id=21

Cheers,

Peter.
----------------------------------------------------
Homann Designs
http://www.homanndesigns.com
email: peter at homanndesigns.com