Hello Guest it is March 29, 2024, 07:33:48 AM

Author Topic: digitiseing  (Read 2616 times)

0 Members and 1 Guest are viewing this topic.

Offline judah

*
  •  30 30
    • View Profile
digitiseing
« on: November 28, 2006, 10:20:10 PM »
after you have digitised your part how do you get mach to cut that part
Re: digitiseing
« Reply #1 on: November 29, 2006, 12:09:50 AM »
You need a cad/cam program that can take in a point cloud... it is not much fun :(
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com