Hello Guest it is March 29, 2024, 02:17:18 AM

Author Topic: Question on Probing and Mach3  (Read 3145 times)

0 Members and 1 Guest are viewing this topic.

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Question on Probing and Mach3
« on: November 28, 2006, 01:18:42 PM »

Hi,Art, Brian and All

Is there a way Mach3 can follow a X,Y path, set to pick-up Z value (set to probe at X Y move distance  say .250) and incorporate it into a new file with X Y Z moves.

Need to trim off some excess edges, on some (one off) curved shapes 2 x 4 feet, plasma, Water-jet ?.

Any Thoughts Ideas ??

Thanks, Chip
Re: Question on Probing and Mach3
« Reply #1 on: November 29, 2006, 12:07:46 AM »
Not at this time... What you are looking at can only be done with the teach wizard at this time.

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com